SB stainless rockers

[Dakota_Don]

My Machinist recomended that i get SS rockers, has anyone used them?

I am looking at these? These will be for street use.

1.5 ratio

https://www.kmjent.com/cart/product.php?printable=Y&productid=355&cat=11233617&page=1&js=y

 

[demon seed]

Here's a better package from a reputable dealer/manufactorer so you know what you're getting. Either way you're also going to need custom length ball and cup push rods. http://www.hughesengines.com/Index/...gory&level0=Q2xlYXJhbmNlIEl0ZW1z&partid=25288

Terry

 

[SoulSurvivor]

What is the difference between 1.5 and 1.6 aspect ratio. And what is an aspect ratio?

 

[demon seed]

What is the difference between 1.5 and 1.6 aspect ratio. And what is an aspect ratio?

more lift at the valve.

 

[Dakota_Don]

thanks aww thier web site is slow here today

 

[Dakota_Don]

ok I called the factory direct, the 1.5 are good for #900 of spring psi, they have a lifetime warrenty, 12 point locking nut,
the Tq is 18 to 20 ftlbs.. and they are SS and bushed, the bad thing is they are made over seas.. that sucks........

 

['64 Cuda]

Comp Cams has similar rocker arms available.

 

[416stroker]

Stainless rockers and shafts will gawl if the rockers and the shafts are both made out of stainless.

 

[Dakota_Don]

the rockers are bushed

 

[Dakota_Don]

but being made overseas turns me off..

 

[416stroker]

I hear ya!