School me on wrist pins

[Hyper_pak]

I have a set of old Venolia slant six pistons, NOS.
No wrist pins.
The box says .901 X 2.656 pins.
I have the locks but need pins.
Where do I go look for them?
I think I will need to bush the rods.
Thoughts?

 

[abdywgn]

trendperformance has a blog on them, but none listed in price sheet.
found a maker of them, but not the size. maybe custom?

PPP Center Titanium Wrist Pins | Increased Engine Performance

PPP Center’s titanium wrist pins have improved geometry that virtually eliminates friction while providing a greater load bearing surface resulting in increased engine performance. Our titanium pins were created for engine builders and have been tested on pro stock drag racing cars, trucks & more.

www.pppcenter.com

 

[TT5.9mag]

Wiseco has a .901x2.500 if that’ll work.

Wiseco Wrist Pin - S611 | S611 | Wiseco

 

[Bewy]

Nope, they wouldn't work, too much end play. The type of C clip will determine the finish on the end of the pin, whether it needs a chamfer...or no chamfer.

 

[ValiantS]

I have a set of old Venolia slant six pistons, NOS.
No wrist pins.
The box says .901 X 2.656 pins.
I have the locks but need pins.
Where do I go look for them?
I think I will need to bush the rods.
Thoug

I have a set of old Venolia slant six pistons, NOS.
No wrist pins.
The box says .901 X 2.656 pins.
I have the locks but need pins.
Where do I go look for them?
I think I will need to bush the rods.
Thoughts?

Sometimes it's cheaper to use other parts...But there are at least a couple manufacturers that'll do a custom pin if that's prudent.

 

[Newbomb Turk]

Call UEM (Keith Black pistons) and they can hook you up.