Shock plate repair 8 3/4

[Dana67Dart]

I have a line on 2 - 8 3/4 shock plates for $20.00 each. both have surface rust (scale) no big pitting though. Down side is one has a broken thread. I assume I can get a replacement perch and weld it in place. I was thinking about another repair. Drill the end of the shaft and tap it. Install a stud with permanent locktite. Not sure if there is enough meat to do this but it seems like a possibility.

What do you all think.

 

[mccoymail]

Mancini Racing Lower Rear Shock Stud

 

[diymirage]

cut the stockers off an weld on two shoulder bolts of the right size

 

[bbrroowwnn]

cut the stockers off an weld on two shoulder bolts of the right size

that is what I did.....easy peasy

 

[Lelo Dart]

These will work.

 

[Dana67Dart]

Thanks all for the info.