[WANTED] Slant 6 exhaust manifold Brass washers etc

-
Status
Not open for further replies.
George Lawicki

George Lawicki

Well-Known Member
Joined
Oct 20, 2019
Messages
177
Reaction score
53
Location
Cleveland OH
Rating - 100%
1   0   0
Contact seller
Does anyone know where I can get the brass washers used on the exhaust manifold for a 74 /6? The studs and other hardware would be cool to but I really need the brass washers one is cracked.

I found this https://www.amazon.com/dp/B00DHV77B4/?tag=fabo03-20 but I do know the size and thickness I need. I haven't taken it apart yet so if some knowledgeable chap would like to help out that would be swell!

I believe this the nut for it? McMaster-Carr
 

Ok send me a pic of which ones you need or do you need them all?
 
Pnypwr said:
Ok send me a pic of which ones you need or do you need them all?
Click to expand...
Ill take it all if you dont mind. I havent got into it I just know the one is cracked, Here is a pic of the hardware

20170501_141045.jpg
 
There's a seller on Ebay selling the whole shebang new reproduction, but it ain't cheap.
 
RustyRatRod said:
There's a seller on Ebay selling the whole shebang new reproduction, but it ain't cheap.
Click to expand...
Yeah I saw that I found a whole kit new from Mancini racing but as far as I know I just need the brass washers. Id hate to spend a **** ton of money for a whole kit
 
Got a complete set and a few randoms I found one of the special nuts on the ends broke so that would need extracting. I ran it all thru the tumbler nice and clean
 
I have a couple of NOS hardware kits if you choose to go that way. Might be overkill for a driver, but, it would be nice for a restoration. It just has the nuts and washers....no studs.
 
Status
Not open for further replies.
-
Back
Top Bottom