[SOLD] Small block Aero Heads

[6pkScamp]

Aero heads 2.02/1.60 with couple of thousand miles on them. Cut to 62cc chambers, home port and polish and Hughes 1.6 rockers, shafts, springs and hold down kit. $600 plus shipping. Photos on request
Brooksville, Fl

 

[6pkScamp]

Aero heads 2.02/1.60 with couple of thousand miles on them. Cut to 62cc chambers, home port and polish and Hughes 1.6 rockers, shafts, springs and hold down kit. $600 plus shipping. Photos on request
Brooksville, Fl

Bump

 

[71Scamper]

you'll need to post up some pics of the porting work. Most people like to see that kind of stuff before they buy them.

 

[txstang84]

What cam are they set up for? Max lift? Do you have any flow numbers or what they made on your combo?

 

[6pkScamp]

What cam are they set up for? Max lift? Do you have any flow numbers or what they made on your combo?

HUG HTL4852AS this is the Hughes cam that I was running. Never had the heads on a bench.

 

[6pkScamp]

you'll need to post up some pics of the porting work. Most people like to see that kind of stuff before they buy them.

I'll try to get some tomorrow

 

[txstang84]

HUG HTL4852AS this is the Hughes cam that I was running. Never had the heads on a bench.

Damn-healthy bumpstick!

 

[txstang84]

I'll try to get some tomorrow

Did you ever get a chance to take a couple pics of the port work?

 

[PanGasket]

are these the 915/587 version or the normal 340/360 version with 2.02/160 valves?

 

[6pkScamp]

Aero heads 2.02/1.60 with couple of thousand miles on them. Cut to 62cc chambers, home port and polish and Hughes 1.6 rockers, shafts, springs and hold down kit. $600 plus shipping. Photos on request
Brooksville, Fl

Heads are sold, rocker gear still available. Have one member interested in them at this time.