bluespyke
Active Member
I have 3 Small Block Race Blocks for Sale. The Blocks will be available to be looked at this weekend at the Indy Cylinder Head Trade show in Indianapolis. I will post pictures tomorrow morning when I unload the truck. Sorry, I'm not more prepared. I'm selling these blocks, because I decide to start thinning out my own collection of small block stuff. I will be posting more Race Oriented Small Block stuff soon. Sorry no stock stuff. PM me for more information. Please see the discriptions below:
9.0 Deck R3 182
Siamese Bore 340 Mains
P4532907 Casting
48 Degree
Billet Caps / Studed
50mm Cam Tunnel
4.195 Bore / ready to hone to 4.200
Sonic Checked / Thick Walls
Pressure Checked
Crack Checked
Measured Mains / Cylinders
$4,200 OBO
9.0 Deck R3 067
Water Block 340 Mains
P4532908
48 Degree
Billet Caps / Piston Oilers / Studed
50mm Cam Tunnel
4.055 Bore
Sonic Checked / Thick Walls
Pressure Checked
Crack Checked
Measured Mains / Cylinders
Block has has been repaired with one sleeve
$2,900 OBO
(SOLD) X Block
59 Degree / Bushed Lifter Bores
Billet Caps / Studed
CORRECTION: Bolts not studs. Please refer to pictures?
4.02 Bore
Measured Mains / Cylinders
Fully Machined ready to bolt together
$3,900
9.0 Deck R3 182
Siamese Bore 340 Mains
P4532907 Casting
48 Degree
Billet Caps / Studed
50mm Cam Tunnel
4.195 Bore / ready to hone to 4.200
Sonic Checked / Thick Walls
Pressure Checked
Crack Checked
Measured Mains / Cylinders
$4,200 OBO
9.0 Deck R3 067
Water Block 340 Mains
P4532908
48 Degree
Billet Caps / Piston Oilers / Studed
50mm Cam Tunnel
4.055 Bore
Sonic Checked / Thick Walls
Pressure Checked
Crack Checked
Measured Mains / Cylinders
Block has has been repaired with one sleeve
$2,900 OBO
(SOLD) X Block
59 Degree / Bushed Lifter Bores
Billet Caps / Studed
CORRECTION: Bolts not studs. Please refer to pictures?
4.02 Bore
Measured Mains / Cylinders
Fully Machined ready to bolt together
$3,900
Last edited:
