dusterbd13
Well-Known Member
Decided im going in a different direction.
Selling custom small block multi port efi.
Victor jr intake modified for mpfi
Edelbrock fuel rails
40lb injectors- support about 500hp at 43.5 psi
1000cfm holly 4bbl throttle body
Cutom plenum spacer with vacuum ports
Megasquirt 2 3.57 and harness. Built by diy autotune. Set up for hei and electric fans
Wiring harness and most sensors.
No fuel pump, wideband, or ignition included.
Can hear run/go for a ride.
Located near Charlotte NC
1500 obo. Got WAY more in it.....
Will consider partial trades for aluminum radiator (stock fitment) and unmodified victor/torker/rpm air gap
20200315_172318 by Michael Crawford, on Flickr
Selling custom small block multi port efi.
Victor jr intake modified for mpfi
Edelbrock fuel rails
40lb injectors- support about 500hp at 43.5 psi
1000cfm holly 4bbl throttle body
Cutom plenum spacer with vacuum ports
Megasquirt 2 3.57 and harness. Built by diy autotune. Set up for hei and electric fans
Wiring harness and most sensors.
No fuel pump, wideband, or ignition included.
Can hear run/go for a ride.
Located near Charlotte NC
1500 obo. Got WAY more in it.....
Will consider partial trades for aluminum radiator (stock fitment) and unmodified victor/torker/rpm air gap
Last edited:
