K kurt Well-Known Member Joined Oct 21, 2009 Messages 69 Reaction score 0 Location chicago Mar 25, 2014 #1 is it ok to start rebuilt engine with just the hedders on wantinng start be fore i get new exhust put on
is it ok to start rebuilt engine with just the hedders on wantinng start be fore i get new exhust put on
67cudafb Well-Known Member Joined Nov 21, 2011 Messages 1,817 Reaction score 131 Location Florida Mar 25, 2014 #2 Depends on your neighbors. If you have a flat tappet cam once you start you need to run it for about 30 mins with rpm about 2500.
Depends on your neighbors. If you have a flat tappet cam once you start you need to run it for about 30 mins with rpm about 2500.
Orangepeel Well-Known Member Joined Mar 12, 2014 Messages 84 Reaction score 4 Location Missouri Mar 25, 2014 #3 Throw a couple three foot sticks of exhaust pipe under there for start up if noise is an issue. Could listen to engine better also.
Throw a couple three foot sticks of exhaust pipe under there for start up if noise is an issue. Could listen to engine better also.
krazykuda Well-Known Member FABO Gold Member How-To Section Editor Joined Aug 20, 2007 Messages 66,493 Reaction score 29,747 Location Orland Park, IL Mar 25, 2014 #4 Go ahead and start-er up