B3422w5
Well-Known Member
Anyone running just the solid mounts on both sides
I run solid on the drivers side only, that way the passenger side has some cushion.
No vibrations in my cars.
no issues.
run a flexible trans mount, no solid there
Thanks for the advice guys!
I run solid mounts on my engine, with a poly transmission mount....I've been running it like this since the early 2000's. The only down side is you will have a few bolts try to wiggle loose every now and then. I just make it part of my yearly racing season prep to check header bolts, starter bolts (those are the only ones on my car that vibrate loose).