Son's Neon HP

-
A

AJ71DUSTER

Well-Known Member
Joined
Aug 20, 2009
Messages
362
Reaction score
4
Location
Michigan
Well we went to a Dynojet in Auburn IN 2 weeks ago to have his Neon Dyno'ed the car did well at the wheel, best pull was 351hp and 341 ft lbs of TQ , but there is more to be had if he had not left his programer at home (2hr drive) so we could back off some of the timing to increase his boost, as it sets now he is only running 13lb of boost we hope to get back to where he was with the org stage 3 unit was set at 28lbs. We are scheduled back on the 12th of Oct,
 
Wow! Those are seriously impressive numbers outta a Neon, what all has he done to it?
 
Ok we added main cap supports to all main caps on the crank, changed out the org oil system to a 3/4 inch draw tube, change out the org oil cooling unit and add a full size oil filter, replace oil pump drive unit with a modified unit, change main pulley off crank, added adjustable cam gears,added a modified intake, had the internal waste gate relocated, now sets on the top side of manifold between 1 and 2 cylinders this way it balances the flow, added a bigger turbo 3576R = T3-T4 50LB Wheel please don't ask me what that means, His car was already set up a a mopar stage 3 unit, before these mods were done, best time was a 12.04 in 1/4 mile.Before these mods

We have not gone to the track yet want to finish the set up first, before we go.
 
Dang that thing will embarrass a LOT of V8s.
 
ILLDuster74 said:
Is it an SRT4 or turbo first gen?
Click to expand...

2005 SRT4 , I can remember the day he bought this car brand new and how much the tech world has caught up with it . he has about 60k on the speedo and still runs strong,just with the stage 3 we ran best time of 12.04(with slicks) can wait until it's finally tuned.
 
You must log in or register to reply here.
-

Back
Top