[WANTED] Speedo gear

[Cuda 1964]

Looking for a 40 tooth speedo gear for a 1964 904 push button trans

 

[Professor Fate]

I've never seen a listing for anything larger than 21 teeth.
Are you sure on that count?

 

[RustyRatRod]

The highest count they come in is 21 tooth.

 

[Dartn440]

I have a box full of speedo gears but I couldn’t begin to tell you if I have what you are looking for without a pic or a part number.

 

[Cuda 1964]

I've never seen a listing for anything larger than 21 teeth.
Are you sure on that count?

The info on the speedo gear was posted on Abody by 69Cudaownr from his service manual giving rear
end ratio along with tire size and speedo teeth count

 

[Cuda 1964]

The gear would be for a pre 1966 904 with clip and o-ring seal and I believe it is orange in color I don't have a part number at this time

 

[MidnightSwinger]

Tire size and gear ratio?

 

[RustyRatRod]

The info on the speedo gear was posted on Abody by 69Cudaownr from his service manual giving rear
end ratio along with tire size and speedo teeth count

See post #3.

 

[Cuda 1964]

27in 3.91 gear

 

[RustyRatRod]

27in 3.91 gear

Yeah, that's WAY out of the stock gear's range. Maybe you can find a drive gear to make it happen, but there are no driven gears that big.

 

[Cuda 1964]

Thanks for the info RustyRatRod

 

[MidnightSwinger]

You need an 18 or 19

18 is purple
19 is dark blue

https://1962to1965mopar.ornocar.com/images/1962-1965-speedometer-pinion-gear-chart.jpg

 

[Cuda 1964]

Thanks for the info and chart pic
MidnightSwinger that helps alot

 

[RustyRatRod]

Brewer's Performance may be able to help you. You may end up needing an adapter of sorts.

 

[Cuda 1964]

Thanks Rusty

 

[RustyRatRod]

Thanks for the info and chart pic
MidnightSwinger that helps alot

Read the fine print under the chart! You need a .75 adapter for that. Like I said, contact Brewer's.