steering box needle bearing install tool

[Miranthis]

Over on the For B Body site there is a thread on rebuilding the aluminum manual steering box. It includes a "Miller tool" for setting the needle bearings. Anyone have a tool or part number for that?

 

[jeff alder]

MILLER MOPAR TOOL 2052500210 BEARING 18MM INSTALLER | eBay Maybe check Ebay there are several "Miller" special tools listed for Mopar

 

[townsend]

It could be either of these tools.
Miller C-3786 for 1-1/4 inch diameter shaft.
Miller C-3875 for 1-1/8 diameter shaft.
Both can be seen on eBay.

 

[Miranthis]

It could be either of these tools.
Miller C-3786 for 1-1/4 inch diameter shaft.
Miller C-3875 for 1-1/8 diameter shaft.
Both can be seen on eBay.

That is diameter of the cross shaft at the distal end?

 

[dadsbee]

Did mine in the Bee with zero fancy tools...

 

[72bluNblu]

Did mine in the Bee with zero fancy tools...

Do tell!

 

[65 Cuda 340]

I couldn't find the Miller tool, so I made my own.

 

[sr71mopar]

You can use grease