Steering column options

-
frozenfish

frozenfish

Well-Known Member
Joined
Mar 13, 2006
Messages
76
Reaction score
87
Location
North Pole AK
The steering column in my 67 Barracuda has manual linkage but Im not going to use it because I'm going with a floor shifter. I'm thinking of swapping it out. Is there an A-Body that had a blank steering column without shift levers, and without auto trans provisions? Or should I just buy an aftermarket?
 
I turned my 68 column from a 3 on tree column to 4 speed on floor. I know there are some articles here to cut the nub off, put metal in and fill. I took my column apart, took time and you'd never know it was a 3 on tree setup
 
hotrodram said:
I turned my 68 column from a 3 on tree column to 4 speed on floor. I know there are some articles here to cut the nub off, put metal in and fill. I took my column apart, took time and you'd never know it was a 3 on tree setup
Click to expand...
0330171949.jpg
 
the ones Mancini carries are nice or, grind down and weld or epoxy the holes in yours, or find a used floor shifter one. if you go after market think about getting one with tilt
 
i have a spare 1970 manual steering column for a Dart think it is green
 
You must log in or register to reply here.
-

Back
Top