Steering wheel removal?!?

-

1970PAValiant

master of the break down
Joined
Aug 3, 2009
Messages
269
Reaction score
3
Location
Allentown
I just got my car back from getting it aligned and my steering wheel isn't where it should be, apparently the previous owner redid the suspension and put the wheel back on 45 degrees off. How do I remove it and move it? anyone with pics would be awsome
 
Take the horn cap off, remove the big nut then pull. Not many pull off by hand so you may need a puller you can get for not much $$ at any auto parts store.


Most good alignment shops center the wheel then set the alignment.
 
You may find that the steering wheel can't be rotated on the shaft because it has a master spline that only fits in one position. You'll probably have to adjust it using the steering gear box.
 
You may find that the steering wheel can't be rotated on the shaft because it has a master spline that only fits in one position. You'll probably have to adjust it using the steering gear box.

That's what I had to do. The steering wheel will only install at one position.
 
-
Back
Top