STR 12 INTAKE W/ HOLLEY CARBS
- Thread starter cawley
- Start date
-
replicaracer43
Grumpy Old Man
- Joined
- Oct 10, 2008
- Messages
- 6,051
- Reaction score
- 7,867
I have 2 quick fuel 450s, dual lokar throttle cables adapted to the A body pedal
2 Eddy 500s. Pics of linkage below. If you want particular angle or have a question PM me.
The trick, as it turned out was to build a shaft assembly that lined up exactly with the throttle shaft on the back carb so that you eliminate all the linkage to the throttle on that side. The return springs, by the way are repops of the Max Wedge pieces.
The trick, as it turned out was to build a shaft assembly that lined up exactly with the throttle shaft on the back carb so that you eliminate all the linkage to the throttle on that side. The return springs, by the way are repops of the Max Wedge pieces.
Oh, stock throttle cable, 318 2bbl throttle bracket (puts the throttle clamp further back) with a piece to raise the throttle clamp to the optimal level.
-
