pauls340
Well-Known Member
Who or where can you get one of these? It's on a KH 4"sbp front disc setup. It goes on the steering knuckle before the splash shield goes over it...Help, thanks
Styrofoam seal on steering knuckle???
- Thread starter pauls340
- Start date
-
805moparkid
Slant and AFX Guy
probably just keeps it from vibrating...
if it wont turn up just use a rubber one (make it) or some RTV
if it wont turn up just use a rubber one (make it) or some RTV
I just go over to Staples and buy a sheet of thin packaging, wrapping, foam and cut out what you need to fit your needs.
That's what i do when i find those things to deteriorated to reuse when i'm rebuilding brakes.
That's what i do when i find those things to deteriorated to reuse when i'm rebuilding brakes.
TurdFerguson
Banned
I don't use the foam or anything there, just bolt it together.
ElFin
Well-Known Member
I used some cheap acrylic caulk that was in stock. Not going to win any shows, anyhow.
TurdFerguson
Banned
What show do they dismantle the car to see if you really went all the way?:sunny:
-
