Super Six intake/exhaust/carb/linkage needed.

-
G

Glenn Gatley

New Member
Joined
Nov 20, 2006
Messages
3
Reaction score
0
Location
North Central FLorida
I am in the process of turbocharging my 225. I currently have the single barrel carb which under boost...will not be enough CFM. Anyone have a complete Super Six intake/exhaust/carb/linkage set-up available?
 
Glenn Gatley said:
I am in the process of turbocharging my 225. I currently have the single barrel carb which under boost...will not be enough CFM. Anyone have a complete Super Six intake/exhaust/carb/linkage set-up available?
Click to expand...

Glen, When I first did my turbo (draw thru), I tried the BBD carb. Had a problem with the float bowl running dry. The needle and the seat, is also the fuel inlet fitting, and would not allow enough fuel flow, to keep the bowl full under boost.
PS: I did try drilling out the seat as large as it would go, without the needle falling through.
 
Just a note, the exhaust manifold is the same for both 1 and 2 bbl carbs.
 
You must log in or register to reply here.
-

Back
Top