[FOR SALE] Swinger Wheel Opening Moldings

-
Status
Not open for further replies.

airgrabber

Well-Known Member
Joined
Feb 17, 2009
Messages
737
Reaction score
74
Location
Florida
Rating - 100%
7   0   0
Contact seller
Set of 4 taken from 74 Swinger. I lined these up against a 70 Swinger and they fit there, too...Nice driver takeoffs, not perfect but decent. 1/2" of one back corner of one of the front moldings was folded over so I unfolded it. See last pic, 3rd from the left. I cleaned these up with some soap and a little cleaner; could use some more elbow grease on the side that screws into the fender but the sides facing out are pretty nice, and the undersides are not all corroded from salt, etc.
WYSIWYG. $125 plus shipping from Florida. USPS Money order or Paypal plus 4% to cover their fees. Box will be somewhat oversize to protect these during shipping. Normally NOS ones are just wrapped in paper and plastic.

P1010002.jpg


P1010003.jpg


P1010004.jpg


P1010006.jpg
 
Status
Not open for further replies.
-
Back
Top