Thermoquad choke

[highwaystar]

I have a 72 intake manifold and a 72 year date Thermoquad. I am looking for the correct factory choke. I have pix of 2. Is the one on the left the correct piece? I am missing the rod, looking to buy one or the whole choke. The one on the right is a Holley and puts it to close to the carb to work. Does anybody know where to get one? Are they availible new or just finding an old one?

 

[pauls340]

If you have a stock 340 intake and a stock TQ, those are not the correct chokes. You need a divorced choke. There's one on ebayy for $125 NOS.

 

[highwaystar]

Hi Paul,
You are right, My intake is date-coded 7/72 and it has the 73 choke, like you see above. I don't believe it is the right intake on my car. The car was made in 7/72, but the motors are usually always made earlier, Right?
thanks for thr good info.
I am looking for a good 73 choke for a Thermo-Quad.

Thanks again,
T.J.

 

[kt340sport]

You can buy them aftermarket, i purchased one from carquest i will post the part number tomorrow it is in a Wells box thinking the part numer is a e623 but not sure , i am at work now .