[WANTED] Throttle lever

-
Status
Not open for further replies.
There are two different length levers, one for the 1 pc kickdown system-the longer one-never installed on an A body. Then the short one with the 3 pc bellcrank style, which you should need-then they have different size holes on the rod end also. There are some slight variations in the length on the short ones.
 
Mike , I think the one on the left is what lemondana says is the correct one. But I'll let you pic your poison ! PM me you address
16548739371142308590156647065741.jpg
 

Status
Not open for further replies.
-
Back
Top Bottom