timing cover for 440 cast crank

[trudysduster]

I am looking for a factory timing cover for a 1976-440 that has the cast crank. I have the huge harmonic balancer and I need the timing cover that has the timing tab attached so I can get this puppy timed. thanks

 

[newmexguy]

may have, picked up two factory B/RB front covers found in local salvage
yard clean out - probably were discards from some build up/chrome job
done years ago - email me direct on yahoo for pics I found them loose so
I don't know exact year.
Dave las Cruces NM newmexguyus AT yahoo
or text me and I can send you pics that way - 505-301-4712

 

[cudamark]

I should have one if newmexguy doesn't.

 

[godfatherofchry]

getting the timing set should not be a problem with any cover.just find top dead center off #1 piston and you can ether make a marker or use a magic marker and mark your timing cover it may be closer then the factory one I have seen the stock timing marks off by 2deg.I always check them and make my Owen mark............Artie