Apr 5, 2008 #1 W whitey Well-Known Member Joined May 26, 2004 Messages 753 Reaction score 6 Location Andreas, Pa (near Allent Can anyone give mt the timing setting for a 360? Thanks, Eric
Apr 5, 2008 #2 G GoodysGotaCuda Mr. Goody Joined Feb 18, 2006 Messages 1,740 Reaction score 56 Location DFW, Texas We talking a stock or modified 360?
Apr 5, 2008 #4 W whitey Well-Known Member Joined May 26, 2004 Messages 753 Reaction score 6 Location Andreas, Pa (near Allent 10:1 cr, basically stock except for the addition of magnum heads, 670 Holley St Avenger, stock vacuum advance distributor.
10:1 cr, basically stock except for the addition of magnum heads, 670 Holley St Avenger, stock vacuum advance distributor.
Apr 5, 2008 #5 Burntorange70 Well-Known Member Joined Feb 18, 2008 Messages 12,870 Reaction score 152 Location Aguanga, CA. It all depends on your combo and what kind of gas you are using. With magnums I have hered somthing like 32-34 total. Try it there thene play around with it from that to get it dialed in.
It all depends on your combo and what kind of gas you are using. With magnums I have hered somthing like 32-34 total. Try it there thene play around with it from that to get it dialed in.