sbh126
Well-Known Member
I'm about to swap the 727 out of my 68 polara and figured while I've got it out I may as well put in a better converter. I dont know much about converters so I'm not sure what I need. Here's the specs; 383, pretty much stock. Headers, intake, and carb. I'll be putting a 727 from a 77 new yorker in. I'm not sure on the rear gear ratio but it's probably stock, I'm guessing 2.90 or 2.73. It's an 8 3/4. What stall point Would I need? The car is just a cruiser. It'll probably never see the track but I'd like at least a little performance.
Also, Any reason a 77 727 from a new yorker would have a problem fitting in my 68? The trans is not rebuilt but it ran great before I pulled it. Any recomendations on what I should change out on the trans while its out?
Also, Any reason a 77 727 from a new yorker would have a problem fitting in my 68? The trans is not rebuilt but it ran great before I pulled it. Any recomendations on what I should change out on the trans while its out?