torsion bar ?

-

63dartman

Well-Known Member
Joined
Dec 11, 2005
Messages
2,230
Reaction score
24
Location
rio rancho, nm
My torsion bars are marked left/right, I know the left goes on the drivers side. Only thing I'm not sure of is which end goes towards the front of the vehicle. Does the marking with the left and right go towards the back where the retainers are?
 
My torsion bars are marked left/right, I know the left goes on the drivers side. Only thing I'm not sure of is which end goes towards the front of the vehicle. Does the marking with the left and right go towards the back where the retainers are?
yes
 
...it doesn't matter, technically -- the bars work the same swapped end for end. But future generations will thank you for leaving the ID number stamping visible, in the rear position.
 
hi, im restoring my 70 340 Duster front suspension. does anyone know what color the lower control arms should be? ive seen them that gold cad color and ive seen them a light gray almost silver color, which is correct
 
-
Back
Top