torsion bar ?

[1968 signet]

i have a bigblock 440 in my scamp. dont know what torsion bars to run, the car will be street driven, i have a set of part #890 #891, #892 #893 which ones sould i use.

 

[demon seed]

i have a bigblock 440 in my scamp. dont know what torsion bars to run, the car will be street driven, i have a set of part #890 #891, #892 #893 which ones sould i use.

I can't remember which numbers are which but I'd go with the bars that measure out to .890" (measured in the middle of the bar) that's what I'm running and the front is firm but not to firm.

Terry

 

[player1up]

If you only have the 2 sets, use the #892 #893 set. Even ending number is right side, odd is left side (892R 893L). I'm running a set of the 892/3 bars in my /6 at 1/4 below stock ride height and it's still too soft in my opinion. The bar diameters should be:
890/1 = .850"
892/3 = .870"