Torsion bars

[2 Darts]

No L or R on a factory bar, really? ;)

I've never seen bars marked like that before. I stand corrected.

 

[64cudaV8]

Ok here are the numbers Im getting off the bars. one end has R 204 on one side and 624 on the other. the other bar has L 194 on one side and 625 on the other end. what bars are these?

 

[Keith Mopar]

624-5: Is equivalent to 2535 890-1 part no. which is a .850 bar.

I believe I got this info from slant6dan. I had the 624 , 625 bars in my 65 V8 Cuda that were replaced with .890 bars.

 

[64cudaV8]

Mine dont have a -5 at the end. just the number. they also have tan colored paint stripe on them. one has one strip the other has two.

 

[72bluNblu]

Mine dont have a -5 at the end. just the number. they also have tan colored paint stripe on them. one has one strip the other has two.

Technically I think that stripe is supposed to be "olive", you can see the color codes that were used by the factory in this article.

http://www.hotrod.com/how-to/chassis-suspension/mopp-9910-torsion-bar-restoration-and-detailing/

But that would also confirm that they're .850" bars.

 

[Keith Mopar]

Mine dont have a -5 at the end. just the number. they also have tan colored paint stripe on them. one has one strip the other has two.

Sorry I shortened the no.'s. They should be 624 and 625 not 624-5.

 

[64cudaV8]

Sorry I shortened the no.'s. They should be 624 and 625 not 624-5.

Ok, I have those then. So basic v8 bars.