tr6060 to LA bellhousing

[madmax2]

Hello !!

need put a tr-6060 (t56-magnum) transmission behind a LA-mopar (418ci strocker)

QuickTime sell one for T56 no T56-Magnum.
MP sell the P5155286 but have the starter inte passanger side, I think it interferes with the oil filter adapter. Anyone tried it?

I have an eraly A-body with LA-engine and TTI headers.

so I was inquiring and measuring I'm going to have to modify a OEM bellhousing, cut... shorten and weld an adapter plate.

Any advice or suggestions?

 

[1970Duster]

Try wilcap to get adaptor from block to GM bellhousing.
Using an adaptor is how Mopar To Ya got use a GM 200R4 into his dart.

 

[Woods74]

They make em'; search the forum.

 

[madmax2]

my transmission was removed from 09' challenger. No have gm bell to adapt, and input shaft is shorter than a833.

 

[cu440da]

You could use a stock Challenger bell, and possibly use a remote oil filter kit?

 

[madmax2]

the Challenger bell is for 11" clutch and 14x tooth flywheel.... other problema.

I called QuickTime, they answered the bell I need is a custom order and it would take 6-8 weeks and would cost $ 950 ... WOW

 

[nerd racing]

Try wilcap to get adaptor from block to GM bellhousing.
Using an adaptor is how Mopar To Ya got use a GM 200R4 into his dart.

I have one of these adapters I'll part with if you can find a T56 gm adapter bell.

 

[1970Duster]

I have one of these adapters I'll part with if you can find a T56 gm adapter bell.

This might have what you're looking for.

http://www.safepay.net/cgi-bin/shop...housing&search=Mopar&merchant=moderndriveline