tunnel ram for /6
- Thread starter dirty white boy
- Start date
-
Well alrighty then! That's kinda cool. Aussie Speed makes this one.
dirty white boy
50 yr old Juvenal delinquent
thats bad *** f'!!
I know, right? How cool would that look stickin through the hood all offset to one side? lol
dirty white boy
50 yr old Juvenal delinquent
or with a 6-71 blower on top of it!!!
dirty white boy
50 yr old Juvenal delinquent
aww just makes ya weak in the knees! but that aussiespeed stuff above my budget! i gotta realy on that home made cave man speed parts!!
Me and you both.
dirty white boy
50 yr old Juvenal delinquent
so,.if the one i posted was cleaned up and done right,..would there be any benefits from it??
Well yeah, it has a four barrel on it. How big is the hole in the intake?
dirty white boy
50 yr old Juvenal delinquent
idk, found pic on FB, the pipe used looks to be at lest 3 1/2 to 4 inches around id hope hole in intake would at lest match it!
I'm not sure there's enough area in that spot on the intake to match the diameter on that piece of pipe. I'd want to take the carburetor off and see first.
dirty white boy
50 yr old Juvenal delinquent
if it dont open up to at lest match the cross section of the 4 holes in the carb base plate its pissing in the wind on a flat rock!
Pretty much.
junkyardhero
Well-Known Member
- Joined
- Jan 23, 2005
- Messages
- 2,927
- Reaction score
- 4,593
or, find a 2bbl intake, snap on a 2bbl ==> 4bbl a-dap-tor then stack a few spacers on.
you could fine tune it with different thickness and design spacers even!
you could fine tune it with different thickness and design spacers even!
dirty white boy
50 yr old Juvenal delinquent
no, all that do is choke a 4 bbl carb!
Any of the old RamCharger guys still kicking? They would know!
thebearded1
Well-Known Member
That supercharged setup even with 1 carb would look cool on my roadster but yea that's a whole lot of money and i'd probably have to upgrade the dana 35 rear end i'm using too.
-
