[Found!] Twin Scoop Mounting Screws

[moparfanatic56]

I am looking for a set of mounting screws for a pair of twin scoops. The scoops i have require the 15/64 end that goes into the scoops. I contacted r/t specialities and all they had were the 3/16ths ones. Anyone have any or know where I can get them.

Thanks
Dan

 

[j_anderson]

Here are a few quick google search results
Mopar Plus (they don't list which size)

Year One (via ebay - they don't list size)

PartsMix (they don't list size)

Dantes (out of stock)

Moparts (they don't list size)

Herb's Parts (they don't list size)

 

[moparfanatic56]

Here are a few quick google search results
Mopar Plus (they don't list which size)

Year One (via ebay - they don't list size)

PartsMix (they don't list size)

Dantes (out of stock)

Moparts (they don't list size)

Herb's Parts (they don't list size)

Thank you I will contact them

 

[Oldmanmopar]

69-72 A & B-Body Superbee R/T Duster Demon Dart Twin Hood Scoop Fastener Kit

This is the kit I used. Some of my studs were loose because someone had installed the wrong studs from fender and quarter extensions. I epoxied them in with, JB weld quik-set . They make better epoxy for fiberglass but its what I had on hand and it held very well.

 

[moparfanatic56]

69-72 A & B-Body Superbee R/T Duster Demon Dart Twin Hood Scoop Fastener Kit

This is the kit I used. Some of my studs were loose because someone had installed the wrong studs from fender and quarter extensions. I epoxied them in with, JB weld quik-set . They make better epoxy for fiberglass but its what I had on hand and it held very well.

That is going to be my last resort, I believe that I purchased the same kit and they were extremely loose. I contacted Dales Cuda Shop and they are going to send me one of the screws to see if it is the correct size.

 

[j_anderson]

That is going to be my last resort, I believe that I purchased the same kit and they were extremely loose. I contacted Dales Cuda Shop and they are going to send me one of the screws to see if it is the correct size.

something else to consider, maybe the side scoops posts would work? or maybe the posts for the 67 GTXs

Either way, please let us know what you find. It would be nice to know who has what and what works.

 

[moparfanatic56]

something else to consider, maybe the side scoops posts would work? or maybe the posts for the 67 GTXs

Either way, please let us know what you find. It would be nice to know who has what and what works.

I seen those also but they don't show a size. Yes I will post the results of my search.

 

[Lee Hay]

There’s someone on eBay that has a bag of mounting hardware listed

 

[moparfanatic56]

I did find the correct mounting screws at dales cuda shop. They were kind enough to send me a sample to assure that was what I needed. The picture shows from left to right the new one, the original and the of the ones I previously purchased. I neglected to get the part number from Dales, sorry.