ultanium
Well-Known Member
First one is 1970 model 340 rebuilt short block that was assembled but never completed, forged crank, rods and 30 over flat top pistons (flycut) installed into the machined block, and it has an unknown purple camshaft in it. It currently has no oil pan, butI will include a brand new Milodon pan and pickup with it. This motor was discussed here in http://www.forabodiesonly.com/mopar/showthread.php?t=231758 last year.
The second 340 is a long block, was pulled from a 73 Charger, and may have a spun bearing (we did not try to start it, but it does turn over with a wrench). It is complete (except intake) and bone stock, heads are removed, has never been bored, I do have the desirable hipo exhaust manifolds that will go with this motor, and many brackets. Vin #3B537236
Looking to sell either one for $1200, or best offer, wife says its time to clean out the garage. Will do some trading for a-body sheet metal, A/C components, or 400 motor. Located 50 miles west of Houston, in Bellville, Texas. Call me at 979-221-4160 or PM if interested.
Tommy
The second 340 is a long block, was pulled from a 73 Charger, and may have a spun bearing (we did not try to start it, but it does turn over with a wrench). It is complete (except intake) and bone stock, heads are removed, has never been bored, I do have the desirable hipo exhaust manifolds that will go with this motor, and many brackets. Vin #3B537236
Looking to sell either one for $1200, or best offer, wife says its time to clean out the garage. Will do some trading for a-body sheet metal, A/C components, or 400 motor. Located 50 miles west of Houston, in Bellville, Texas. Call me at 979-221-4160 or PM if interested.
Tommy
