Everyone I've seen has two holes.Nothing strange about a mid to late 70’s 2 Barrel Slant Six Intake.
Jake
Hasn't been worked on. Original cast surface . No evidence of cutting it or grinding.Someone removed the divider. Gosh, it's not rocket science or alien invasions.
Hasn't been worked on. Original cast surface . No evidence of cutting it or grinding.
CuteThat'll just be your little secret.
Cute
It's been modded, whether you believe it or not. If it was professionally done, there's no way you could tell after a few years passed. "Cute" or not, that's the truth.[/QUOTE
Is that so? You don't have a clue dude Spare me your sarcastic opinion.
I guess you haven't figured out I'm not interested in your opinion.Ok then. You have a one of one never before produced until you found it that's worth millions. Does that better fit your narrative?
I guess you haven't figured out I'm not interested in your opinion.
DudeI don't know what your problem is, but I am trying my best to be straight up with you. That's a modded intake. Like it or not. Think it's cute or sarcastic all you want. You're the one who posted asking about it. I cannot help it if you don't like the answers you're getting. That part is not my concern. Nor is it that you're "not interested".
Dude
I have conflicting information about it. That's why I posted. Simple curiosity
Your opinion would be noted without the rocket science bs.or little secret crap. Move on please
I welcome the facts either way. Just be cool about how you reply. I've had conflicting opinions. That's why I posted The picture is not worth anything. You cant see any detail. Very poor resolution. I've held it in my hand and examined it. My opinion is it hasn't been worked on. I remain curious.And even "I" can see fresh metal in your picture just under the opening to the plenum. It's been modded. Look at the circled area and the arrow. Either it's been ground on or cut, but it's been modded. You're acting like I am saying it's a bad thing or a POS. I'm not.
View attachment 1715280331
And even "I" can see fresh metal in your picture just under the opening to the plenum. It's been modded. Look at the circled area and the arrow. Either it's been ground on or cut, but it's been modded. You're acting like I am saying it's a bad thing or a POS. I'm not.
View attachment 1715280331
Originally I have no idea.Sure that’s not a marine intake?
What’s it off of?
Thanks for your input. It's appreciated4041043 - intake manifold, RG-series 225 2bbl, super six, 1977-1980. This is what it was used on and used to look like. Nothing special about it. It has been modified. Probably to put a different carburetor on it.
View attachment 1715280341
Now, there are TWO that I know of that had that pattern. One was an old Mopar Performance cast iron piece, the other is from a company in Australia. Do you have a casting number?
Here you go. The sellers opinion was it was Australian.Now, there are TWO that I know of that had that pattern. One was an old Mopar Performance cast iron piece, the other is from a company in Australia. Do you have a casting number?