Upper control arm question

[adamparrish123]

I have a 73 swinger with drum up front and will be replacing them with k-h disc
From a 71 duster are the ball joints the same thanks again

 

[hemi71x]

No.
Your going to have to also swap out your upper control arms to the 72 and earlier versions.
ALL 72 and earlier cars used the small ball joint, wether the car is Drum, or Disc brake.

73 76 cars use the large ball joint, both discs and drum brake.

 

[hemi71x]

http://www.forabodiesonly.com/mopar/showthread.php?t=224207

Read this posting from earlier during the week.

Your also going to have to replace your Lower ball joints, if your going to be swapping to the 4 piston Kelsey Hayes disc brake components onto your car.

 

[adamparrish123]

Ok anybody have a set of 72 and earlier upper control arms I already have the lowers

 

[hemi71x]

I could set you up with a pair of 72 and earlier UCA's.
How about $40.00 for the pair, + FEDEX'ing to your address?

 

[adamparrish123]

What condition are they in

 

[hemi71x]

Send me your e mail address in a pm message, and i will send you pictures, later this afternoon. (Pacific Time)
Jim V.

 

[adamparrish123]

pm sent