Upper Radiator Hose

-

ardentindustries

Well-Known Member
Joined
Jan 1, 2010
Messages
423
Reaction score
43
Location
Idaho
Hey all,
Just wanted to post this to share for anyone searching in the future. We know the aftermarket radiators are not perfect (this KKS unit is pretty dang nice though), and such the upper radiator hose inlet/outlet was shifted over toward the passenger side too much and caused the usual slant 6 upper radiator hose not to work.

I spotted a picture of a hose on ebay, found the part number, did some searching to confirm inlet/outlet size and then found one local. Surprisingly, it fits pretty darn well. Trimmed 1" off of one end but it gives the "zig zag" needed for this radiator.

Just know we're sometimes searching for info of something another guy has done and wanted this available to anyone looking.

Gates Upper Radiator Hose : 20450

(Keywords: Radiator hose, slant 6 six, 20450 for aftermarket radiator, replaced, new )

20231020_055838.jpg


20231020_055841.jpg
 
I think I had a similar issue when replacing my radiator when going from an 18" to 22". If I recall, I cut parts off the lower hose and used it for the upper.
 
-
Back
Top