[SOLD] Used EngineTech .030 over, cast pistons for the 318 engines P/N P3004 - .030

[physixx]

I have for sale a set of used EngineTech .030 over, cast pistons for the 318 engines P/N P3004 - .030. These were removed from a 1985 318 and look to be in excellent shape. Some of the skirts show some wear but doesn’t look to be bad at all. These pistons are the press fit design, have been cleaned and are ready to install. They sit approximately .070” below the deck of the block and should give 9.1-1 compression with a stock 64 cc open chamber design head and a .030” thick head gasket.

Amazon product ASIN B07XF6SY95
Also included are the connecting rods that are still attached. They are the 3418645 non-bushed rods as used also in the 360 engines. The rods have absolutely no issues on the big ends. I would like to get $100 for everything plus the shipping.

I also have the cylinder block that these pistons and rods were in. They are listed for sale on a separate thread.

[FOR SALE] - .030 over 318 block with the original main caps and bolts

Ken
Edison, NJ

 

[physixx]

$85.00 for the pistons and rods plus shipping?

 

[physixx]

The pistons and rods are now listed separately.