Idaho
Well-Known Member
- Joined
- Oct 17, 2006
- Messages
- 2,595
- Reaction score
- 274
I've completely rebuilt my 73 k member, control arms and struts. New ball joints, moog offset bushings, LCA bushings, and strut bushings.
Everything was sandblasted. K welded up with skid plate and tow hook. LCAs tightened and reinforced. 2 coats of POR 15.
I also have a rebuilt steering box with low miles.
I'd like to get an idea what I should ask for this setup. The reason is I'd like to swap it for a Hemi Denny front end. If I can get some value out of this to put toward it.
Any ideas?
(Ill post pics later)
Everything was sandblasted. K welded up with skid plate and tow hook. LCAs tightened and reinforced. 2 coats of POR 15.
I also have a rebuilt steering box with low miles.
I'd like to get an idea what I should ask for this setup. The reason is I'd like to swap it for a Hemi Denny front end. If I can get some value out of this to put toward it.
Any ideas?
(Ill post pics later)