Vintage Clifford Cam and Valve Lash Specs

-
doc540

doc540

Well-Known Member
Joined
Oct 7, 2013
Messages
521
Reaction score
226
Location
Beaumont, Texas
Doesn't appear they offer this mild cam any longer.

Late '70's, early '80's

Note the valve lash adjustment

lancer cam specs1.jpg


lancer air cleaner decal1.jpg
 
Jack is long gone, he was the real driver of the company. I had gotten a cam years ago from Clifford, it was a Moon Cam. I would guess since this one is a mild cam, and they found some different suppliers and different grinds. It's a mild cam for a hot six anyway. Oregon is re-grinding a lot of cams for the slant six crowd now.
 
MOPAROFFICIAL said:
Because it didnt have enough lift.lol
Mopar performance put out a .460/260
Not the best grind beyond a torque/RV cam really, but a decent amount better than stock.
Click to expand...

Good to know.
All I want in the Lancer is a little low end grunt anyway.

It's too ugly to be fast. :eek:

lancer may 18a.png
 
Hyper_pak said:
Jack is long gone, he was the real driver of the company. I had gotten a cam years ago from Clifford, it was a Moon Cam. I would guess since this one is a mild cam, and they found some different suppliers and different grinds. It's a mild cam for a hot six anyway. Oregon is re-grinding a lot of cams for the slant six crowd now.
Click to expand...
Oregon cams does have good Grinds but i could never find the right one in my application. Was going to call them and send them a grind a fellow member came up with. Which is close to the clifford 268 Camshaft.
 
You must log in or register to reply here.
-

Back
Top