challengersteve
Well-Known Member
You are buying a Vintage Edelbrock LD4B for a Mopar 273 or 318 with the smaller ports (not 340 - 360 heads).
This is the version that was sold by Direct Connection and has the Chry 288613 cast into the top. This is legal for NHRA stock class I believe with these numbers.
This is in Very Nice Condition and has been cleaned and 2 carb mounting holes professionally repaired.
There are no cracked places and all the threaded holes are great.
There has been an additional nipple added to the front as shown (probably for a mechanical temp gauge). This could be plugged if wanted.
The holes that mount this to the heads have all been elongated slightly to allow this to mount on an engine that has had the heads milled. This is absolutely no issue and was a fairly common thing to do back in the day.
This is 169.00 including shipping in the CONT USA. Canada and other International shipping would be more.
I accept paypal and credit cards over the phone
Thanks, Steve Schweitzer
This is the version that was sold by Direct Connection and has the Chry 288613 cast into the top. This is legal for NHRA stock class I believe with these numbers.
This is in Very Nice Condition and has been cleaned and 2 carb mounting holes professionally repaired.
There are no cracked places and all the threaded holes are great.
There has been an additional nipple added to the front as shown (probably for a mechanical temp gauge). This could be plugged if wanted.
The holes that mount this to the heads have all been elongated slightly to allow this to mount on an engine that has had the heads milled. This is absolutely no issue and was a fairly common thing to do back in the day.
This is 169.00 including shipping in the CONT USA. Canada and other International shipping would be more.
I accept paypal and credit cards over the phone
Thanks, Steve Schweitzer
