Vinyl Roof Trim Installation help

-
340duster

340duster

Well-Known Member
Joined
Jun 3, 2004
Messages
852
Reaction score
42
Location
AB, Canada
I am installing a full vinyl roof on my 74 duster. The car originally came without a vinyl roof. Does anyone have pictures of the B-pillar trim location. I have all the trim, I just need to figure out how to mount it. It appears that there is one rivet near the quarter window and a plastic clip to hold it on as well there seems to be a pin somewhere in the middle of the trim that would go in a locating hole. Anyone with any pictures? I have a spot weld gun that will do the rivet heads too.
 
Can anyone help me with this? I am getting the car preped for paint and want to get all the trim test fit. Even a picture of the installed trim would help....
 
there you go.

a.jpg


b.jpg


c.jpg


d.jpg
 
Thanks for going through the trouble to post the service manual info, but I really need is some pictures of the B-pillar trim on a duster or dart sport so I can locate mine. I am installing a vinyl roof on a car that was originally a plain roof. I have the trim but need to get the exact location and mounting details.
 
I am sorry.. I am still not sure what you want. This trim terminology in English is new to me and confuses me at the moment!
I could send you pics of mine (used to have vinyl roof) but I am going to back off until I will have the time read about all these!
 
Is the trim still in place on your car? Or are the Rivets and/or holes still visible?
 

You must log in or register to reply here.
-

Similar threads

1
1966 Dart GT Roof Trim Help
Replies
8
Views
486
1966Dartman
1
1MeanA
Installing Dart interior roof side trim
Replies
6
Views
357
1MeanA
1MeanA
Davco
Roof Joint Area at Quarter Panel - Demon w/ Vinyl Top
Replies
16
Views
734
Demonracer
Demonracer
slantflat
Vinyl Top Trim for 68 Valiant
Replies
5
Views
392
slantflat
slantflat
1MeanA
1970 Dart vinyl roof seam - 38 versus 43
Replies
0
Views
333
1MeanA
1MeanA
Back
Top Bottom