Wanted: 318 PS bracket

[scamp80602]

I have a 75 318 Scamp with CA emissions - smog pump. I'm wanting to remove the smog pump and replace the current high mount PS bracket - it mounts the PS pump above the smog pump - with the standard low mount bracket that mounts the PS pump where the smog pump is now. I'm looking for the low mount PS bracket. Thanks!

 

[PlumCrazyDuster]

i think i have one, let me check and get back to you

 

[scamp80602]

Thanks PlumCrazyDuster, I'm all set - found new reproduction brackets on ebay for about $65 shipping included. I think I'll go with those. I didn'r realize they were so available.

 

[340duster]

Do you realize the pulleys are different as well? I believe the belts are located further away from the engine with the "high mount" power steering.

 

[scamp80602]

Thanks for the tip 340duster, I didn't know the pulley's were different. Maybe my best bet is to buy a used PS pump with pulley. My current pump looks different than either of the pumps in the service manual. The mounting is also way different. I may be best off with the "ham can" Saganaw unit.