[WANTED] Wanted: 340 X Heads

[KCS]

I'm looking to turn my 67' 318 short block into something a bit nastier by bolting on a set of 340 X heads. They don't need to be finished, just in rebuild able condition. Thanks folks!

 

[d5667]

I have some x heads but wouldn't 302's be a better match?

 

[davescuda]

I have X heads and 302's

 

[deviledchin]

I have a set of the x heads if your still looking.

 

[str12-340]

2.02 valve heads require notching the top of the bore to work, otherwise the outside edge of the valve is shrouded and won't flow. You might try a set of 360 heads with 1.88 valves that require no such work and are probably cheaper... Just sayin'