Wanted 69 Dart Driveshaft W/manual Trans

[69383gts4spd]

Can anyone out there help me? I need a driveshaft for my 69 dart with manual transmisison & 8 3/4 rear axle. Must have large joints, 3 inch diameter, & will be 51.53 inches long center to center on the u-joints. From what I can dig up this driveshaft is in 68 or 69 dart with any v8 & manual transmission. Slip yoke & u-joint condition not importatn as I have new ones. The one that I thought was correct & restored is for a duster. my e-mail is prp1973@yahoo.com or call me 715-271-0970. Thanks ,
Pat

 

[69383gts4spd]

Anyone have one? I'm not looking to get one for free

 

[69383gts4spd]

bump

 

[twister360]

I've got a driveshaft laying around here and I'll check out the specs and see if it fits your application!

 

[69383gts4spd]

thanks twister, I will cross my fingers

 

[69383gts4spd]

Ok, anyone have one the same specs but 2 or 3 inches longer so it can be shortened. needs to have the tapered down end on one side so it appears stock & clean up well when blasted