Wanted! SB intake manifold measurements!

[604]

I am compiling a list, or trying to,
Of all SB mopar intake manifold specs. And any help would be appreciated! I will be putting it in chart form and post it on hear for all to benefit from. The following is a list of the ones I already have:

Weiand Stealth
ED Performer
ED Performer RPM
ED Performer RPM Air Gap
ED Torker II
ED Victor
ED LD4B
ED TM5 Tarantula
Holley Street Dominator

The measurements I am wanting are hight Front, and Rear (measured with a straight edge across the carb pad down to the front and rear mounting face) And the port dimensions L X W

I think this would be very helpful for any one worried about hood clearance.

Some I know I need are stock 273, stock 340, Offenhauser 360 pn5884, Holley track dominator, and any thing else some one may have laying around.

 

[604]

I have also found the dimentions for:

Offenhauser Port-O-Sonic 6073

Weiand X-celerator 7545

 

[rumblefish360]

All the Edelbrock intake manifolds measurements can be found at the Edelbrock web site except the LD4B and the TM5 Tarantula. I am not sure about the Stealth, which can be found at Holley's web site. http://holley.com/

Here's the Stealth's page; http://holley.com/8022.asp

 

[604]

All the Edelbrock intake manifolds measurements can be found at the Edelbrock web site except the LD4B and the TM5 Tarantula. I am not sure about the Stealth, which can be found at Holley's web site. http://holley.com/

Here's the Stealth's page; http://holley.com/8022.asp

Thanks but I already have the specs for the ones in the list. I guess I should have been more clear.

Thanks!

 

[rumblefish360]

Um, no, I think I should have read better.LOL

Somewhere around here I started a sim. type thread on SB intakes. I do not think measurements are included though.