water/ oil separator?

[barbee6043]

wondering any recommendations for adequate and affordable separator?
I picked up used 60 twin stage compressor. want to use for painting. thanks for any ideas...

 

[bOb shingler]

I've used harbor freight ones on two different compressors and they work fine and are inexpensive.

 

[barbee6043]

I was there other day and all I could find were the ones that go on end of gun. I will return and see if I can find some help there. there were having a sal e and it was fun of people.

 

[340sFastback]

http://www.harborfreight.com/38-desiccant-dryer-with-oil-removal-filter-69923.html

 

[adiffrentcity]

If you're going to do a lot of painting, even several small parts, you should also put a water trap ahead of the dessicant to keep it from going bad too quick. I've even seen a professional 3 stage system on craigslist and the dessicant to refill isn't too expensive. Or if you're handy with a welder fab your own out of schedule 80.