waterpump bypass hose

[Eric Mulay]

I have a Edelbrock 7577 intake on the 360 magnum and the LA style water pump, i have purchased 2 bypass hoses, both wont fit, they do not have the correct curve, ...

what has worked for you guys?

thanks

 

[4spdragtop]

I've used this from dealership on a LA 273. Silicone lined.

 

[brian6pac]

What doesn't fit ?

 

[67dartgtgo]

That intake fitting comes off at a 90* angle unlike the LA style intakes that are more like a 45. You might have to trim the hose down a bit and muscle it on but it’ll go on ok.

 

[Professor Fate]

Fix for by-pass hose with LA water pump
Pics in post #12

 

[triumphman]

As mentioned by 67dartgtgo, trim. Or as we use to say "if it don't fit, make it fit"

 

[Eric Mulay]

What doesn't fit ?

When i shoved it on the the intake.. Then to the water pump.. It kinks..

 

[Eric Mulay]

View attachment 1715534250 That intake fitting comes off at a 90* angle unlike the LA style intakes that are more like a 45. You might have to trim the hose down a bit and muscle it on but it’ll go on ok.

I got it in.. But it had a good kink in it ..
Then i trimmed it.. Then i trimmed it again..

Then it was too short.

I see yours.. So.. Ill get another one. Try again.

 

[brian6pac]

cut it shorter at the intake, it's to long.

 

[4spdragtop]

Dealer should have them relatively cheap. Around $10?

 

[triumphman]

You are gaining what is called "experience". You will win. Stay with it.

 

[rbkt65]

the link professor fate posted is the one i will use.

 

[Furyus67]

Two of these (One for Intake Manifold, on for water pump):
Mopar Perf. Intake Manifold Bypass Fitting Adapter #MOPP4876374

One of these:
Mancini Racing Intake Manifold Bypass Hose Kit #MRE4876373

Both from Mancini