skep419
5.9 Magnum 4 speed afficionado
reusing the fluid and filling it through the axle tube. (one jack stand tilted)
ways to speed up 3rd member swap
- Thread starter skep419
- Start date
-
reusing the fluid and filling it through the axle tube. (one jack stand tilted)
74DartSwinger360
The Brat Pack
Man I want that mount its so cool and handy
skep419
5.9 Magnum 4 speed afficionado
I've got right stuff gasket maker on the housing side of the gasket and thick grease on the 3rd member side. I also installed a drain plug on the housing. Planning on building the jack pictured above. hopefully be able to swap diffs in less than 20 min.
-
