Weiand low deck tunnel ram top?

[J.V]

Hey!
I have Weiand low deck tunnel ram part number 1986 with single quad top and I am looking for dual quad top. Does any one know will Weiand part number 1913(same as rb tunnel ram has) top fit for this intake? I guess this is older casting because this has 2 part plenum with 6 bolts for top part of plenum?

 

[brian6pac]

Do you have a picture, can't seem to find one on the net for that #

 

[J.V]

This is only picture I got right now.

 

[brian6pac]

I don't think I have ever seen that top before,

but I think the 440 top will bolt onto the base.

 

[mygasser]

I guess the top is 2 parts as you can't access the bolts holding the plenum onto the base with the single carb top.
Neil.

 

[brian6pac]

I guess the top is 2 parts as you can't access the bolts holding the plenum onto the base with the single carb top.
Neil.

Good point!

 

[J.V]

Yeah that makes sense but this one has 6 bolts in top and usually i have seen these with 4 bolts? Does anyone know for sure if that rb top fits or have dimensions of rb version top bolt pattern?

 

[oldkimmer]

Here is a couple of pics. Mine has 4 bolts. Kim

 

[J.V]

Yeah, plenum is attached with 4 bolts. I meant that top of plenum is 6 bolts. I need info will that rb model top(including plenum) fit to low deck base?

 

[oldkimmer]

Mine is only 1 piece. It doesn’t separate. Kim

 

[J.V]

Is that rb or low deck version?

 

[oldkimmer]

It’s the RB intake. Kim

 

[J.V]

Can you measure bolt pattern?

 

[oldkimmer]

This is with a tape measure, so roughly 9 1/2 X 3 3/4. Kim

 

[J.V]

Thank you! I measured and it was 9 9/16 (9,566) x 4 inches exactly. so I'm pretty sure that rb version top will fit.