What are these and where to they go?

-
DesertRat

DesertRat

Leading edge boomer
Joined
Jan 22, 2005
Messages
3,255
Reaction score
3,143
Location
Moses Lake, Washington
These items came out from the front end fenders or suspension and I am at the stage where I need to install them but cannot remember or find documentation where they go on a 67 Barracuda. I would appreciate some guidance------------------DR-------------:)

Guards.jpg
 
They go in the front wheel wells.. Attached to the frame.In the center of the K frame on each side..They are Splash/Dirt shields..
See my Build Thread below...
 
Last edited:
They look like the rubber seals that go inside top back of fender to seal gap of inner well.
 
Here is a picture of the metal ones on a 66 abody. Between the legs of the "k" behind the fwd strut.
Hope this helps
Joe

image.jpg
 
Well I went through Mitch's build thread, it took me back to mine, a lot of similarities. Very nice car Mitch! I could not find the detail of the guards but I went through my own build thread and found a couple of photos of the detail I needed. Tonight I will paint them with some SEM I have and get them on the car and off the shelf. Thanks to all who responded!
DR--------------------:D
 
You must log in or register to reply here.
-

Back
Top