what are these-any guesses? 68 cuda

-
volare360rt

volare360rt

Well-Known Member
Joined
Jul 5, 2009
Messages
48
Reaction score
0
Location
tillsonburg ontario
first off-my first attempt at posting a pic so bear with me LOL
68 barracuda fastback
just to the right(drivers side) of the wiper motor
those 3 vertical holes with gromets

any guesses

they were like that when we got it,just dont think they are supposed to be there
the car was originally from Texas-so a good guess would be for an aftermarket/jury rigged AC setup
car has no AC-not equiped as far as I can tell-nothing says it ever had it

the car also had a torque strap on the drivers side motor mount
and a sticker in the back window for a drag strip
it COULD have been raced-
but....
318(non numbers matching but a 68 motor)-904 -7 1/4 2.76 open rear
maybe it was swapped out,raced and then put back together?
who knows-it was brought up from texas in the mid 80s-orig blue-repainted dk green when it was driven up-if this sounds familiar to anyone let me know-very long shot but hey you never know

Thanks

sorry have to resize it-2 KB too much

104ab.jpg
 
there thats better
I know its a mess-but need to pull the tranny-wanna put the motor and clean everything-replace the headers ect
 
thats what I was thinking
I am not sure of any options the car may have had at anytime in its life that would require something like them
so now I need to make a few plugs to fill them up for now

thanks guys
 
Someone may have popped the holes there to route a manual oil and temp guage setup. Where they come thru on thte inside is real close to where the arms for the wiper motor go across so whatever it was couldn't have extended into the cabin much without going down to clear the wiper linkage.

Larry
 
You must log in or register to reply here.
-

Back
Top