What do you think of this build?

-
sireland67

sireland67

FABO Gold Member
FABO Gold Member
Joined
Oct 27, 2010
Messages
10,962
Reaction score
6,777
Location
WV
Guys give me some opinions on this build.
I get my part back from the machine shop tomorrow.

94 360 magnum.
Standard bore with fresh hone.
KB 107's
Stock stroke bottom end balanced.
Eddy out of the box aluminum heads.
Comp 1.6 roller rockers.
Comp cam http://www.summitracing.com/parts/CCA-20-812-9/
I have headers, M1 open intake, 750 holley vac sec.

Going in a all steel 73 duster with 4-speed, with 8.75 3.23 suregrip.
The car has 24.5" tires.
The car has manual brakes and steering.
I may change the gear ratio later, I have an extra suregrip and 489 case.

How much hp and how do you think this will run in a street car?
 
I myself would go to the next cam up, use an Air-Gap, 3.91 with a 26 - 27 inch tire. It'll run excellent!
IF you had F.I., then I'd use the M1.

Oh, (Edit!)

With your current set up, run a RPM. It'll make north of 400hp, no problem.
 
Thanks,
I already have the M1 so I will use it, picked it up for $170 off a member here, only had dyno time.
The 3.23 gears and 24.5" tire is currently in the car.

Plan B is a 4.30 gear and 27" tire.
 
I also like a heavy cam in a 4-speed, but backed off on the duration on this one, for better idle.
I did this because the wife may drive it once in a while.
Also it is my kids first car when he turns 16.
 
You must log in or register to reply here.
-

Back
Top