What spindles do I have 9" or 10"?
- Thread starter Jdart72
- Start date
-
Oklacarcollecto
Life is an experiment
Neither one. You have disc brake spindles.
What Oklacarcollecto told you is true.
You have a Kelsey Hayes disc brake set up on your car, that was used on the 65-72 A Body's.
So when it was converted to Disc's, they used all the factory parts from the donor car.
You have a Kelsey Hayes disc brake set up on your car, that was used on the 65-72 A Body's.
So when it was converted to Disc's, they used all the factory parts from the donor car.
What are my option for changing over to big bolt? Is there a kit or do I have to change upper control arms, ball joints, and spindles ect?
Oklacarcollecto
Life is an experiment
Here is a detailed thread on using Mustang rotors on your Kelsey Hayes brake set up.
http://www.forabodiesonly.com/mopar/showthread.php?t=20544&highlight=mustang+rotors
http://www.forabodiesonly.com/mopar/showthread.php?t=20544&highlight=mustang+rotors
grumpuscreature
Resident Curmudgeon
X2...http://www.forabodiesonly.com/mopar/showthread.php?t=20544
It's the only sticky in the brake section. Works like a streak and won't break the bank. Surprised you didn't see it.....
It's the only sticky in the brake section. Works like a streak and won't break the bank. Surprised you didn't see it.....
If I went with the 73 and newer set up can I get new parts?
If I went with the 73 and newer set up can I get new parts?
Oklacarcollecto
Life is an experiment
You can get new upper control arms but they will be China junk.
You can buy nice tubular upper control arms from a member here.
You can buy nice OEM used upper control arms here or eBay and maybe someplace local if you get lucky.
You can buy new rotors and remanufactured calipers.
If you get some good used OEM spindles and backing plates you will be set.
If you were close to me we could make a trade because I have everything you need.
You can buy nice tubular upper control arms from a member here.
You can buy nice OEM used upper control arms here or eBay and maybe someplace local if you get lucky.
You can buy new rotors and remanufactured calipers.
If you get some good used OEM spindles and backing plates you will be set.
If you were close to me we could make a trade because I have everything you need.
-
Similar threads
